YOUR PRE-INSTALLATION CHECKLIST

Five simple ways to get ready for your new gear.

1. SAFETY FIRST – EVERY TIME

Before inspecting, cleaning, or preparing your firearm, remove all ammunition from the work area. Follow your firearm manufacturer’s safety instructions throughout the process.Before inspecting, cleaning, or preparing your firearm, remove all ammunition from the work area. Point the firearm in a safe direction, remove the magazine if applicable, open the action, and visually and physically verify that the chamber and 

magazine well are empty. Follow your firearm manufacturer's safety instructions throughout the process.

Pro Tip: Keep your ammunition stored separately from your work area. A clean, organized workspace makes it easier to focus on the job at hand.

2. GIVE YOUR FIREARM A QUICK HEALTH CHECK

Your new accessory deserves a solid foundation. Take a few minutes to inspect your firearm for worn, damaged, loose, or missing components. Look for damaged screws, worn mounting points, cracked furniture, loose hardware, or anything else that doesn't look quite right.

If you discover a problem, consult your firearm manufacturer's guidance or a qualified gunsmith before proceeding. If a replacement component is needed, ordering it now could save you another trip to the store and help prevent installation-day delays.

Pro Tip: If something looks questionable, don't assume your new accessory will fix it. Address existing problems before putting your firearm back into service.

3. GIVE IT A LITTLE TLC

When was the last time your firearm received a thorough cleaning? With the firearm verified unloaded, this is an excellent opportunity to remove accumulated carbon, dirt, and residue according to the manufacturer's cleaning instructions.

Inspect accessible areas for unusual wear or corrosion, and use only the cleaning products and lubricants recommended for your firearm. Allow everything to dry as appropriate before installing your new accessory.

Pro Tip: Have your cleaning supplies, the correct tools, and your firearm's owner's manual ready before you begin. Good preparation makes for a smoother installation.

4. CHECK YOUR GEAR AND AMMO SUPPLY

Installation day is more fun when you're not scrambling to find something you need. Take inventory of your range bag, eye and hearing protection, targets, and other essentials.

If you plan to test your upgraded firearm at the range, check that you have the correct ammunition for your specific firearm and caliber. Always follow the firearm manufacturer's ammunition specifications.

Pro Tip: Check your range's ammunition rules and operating hours before heading out. A little planning can save a disappointing trip.

5. MAKE A PLAN TO PUT YOUR UPGRADE TO USE

Your new Adaptive Tactical accessory is almost there! Why not make a plan to enjoy it? Reserve some time at your favorite range, schedule a session with a qualified firearms instructor, or plan a range trip with a friend.

If you're unfamiliar with the accessory or its installation, review the applicable instructions before beginning. Some installations are straightforward, while others may require specialized tools or a qualified gunsmith. When in doubt, let a professional handle it.

Pro Tip: After installation, follow the product and firearm manufacturers' instructions for inspection and function checks. Any required live-fire testing should take place at an appropriate range, following all applicable safety procedures.

Ready for Installation Day?

A little preparation goes a long way. By the time your Adaptive Tactical gear arrives, you'll have everything lined up for a smoother installation.

Before getting started, review the instructions specific to your product and firearm. When in doubt, consult a qualified gunsmith.

Built for Real-World Performance. Made in the USA.

Safety Reminder: Always follow your firearm manufacturer's instructions and applicable laws. Never use a firearm that is damaged, improperly assembled, or has not passed the manufacturer's required safety checks.